StarTech.com ARMWALLDSLP User Manual page 18

While supporting the weight of the Monitor, carefully
1.
align the Mounting Hole on the Monitor Mount with the
Mounting Peg on the top Spring Arm.
Slide the Mounting Hole on the Monitor Mount over the
2.
Mounting Peg until it clicks into place.
Using the Hex Keys, adjust the swivel tension of the
3.
Monitor Mount by loosening or tightening the Hex Screws
located on the Monitor Mount next to the Mounting Hole.
Removing the Monitor Mount
Slide the Thumb Clip away from the Monitor Mount,
1.
disengaging the locking mechanism.
To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support
Attaching the Monitor Mount
17