Waterous Floto-Pump Operation And Maintenance page 37

Safety Introduction
Pump and Impeller Components—High Pressure FLOTO-PUMP
Description
7 Engine
12 Screw—3/8-16 x 1-1/2 inches
13 Locknut—3/8-16
14 Washer—3/8 inch
16 Mechanical seal—included with engine replacement kit #187, refer to
18 Impeller
63 Impeller bushing
19 Dowel pin—5/16 x 3/4 inch
20 Upper volute body
21 Screw—5/16-18 x 1-1/2 inches
22 Lower volute body
184 Volute bushing—flanged
36 Pipe nipple—1 NPT x 7-3/4 inches
37 Discharge nozzle—1-1/2 NH, 1-1/2 NPSH, or 1-1/2 BSP
46 O-ring—7-1/4 x 7-1/2 inches, included with engine replacement kit #187, refer to
Product Overview Operation Maintenance Service Parts
Page 34.
Page 34.
|
37 40
Troubleshooting Warranty