Waterous Floto-Pump Operation And Maintenance page 31

Safety Introduction
Pump and Impeller Components—Standard FLOTO-PUMP
Description
7 Engine
12 Screw—3/8-16 x 1-1/2 inches
13 Locknut—3/8-16
14 Washer—3/8 inch
16 Mechanical seal—included with engine replacement kit #187, refer to
18 Impeller
19 Dowel pin—5/16 x 3/4 inch
20 Upper volute body
21 Screw—5/16-18 x 1-1/2 inches
22 Lower volute body
Discharge nipple—1-1/2 NPSH x 11 inches
36 Discharge nipple—1-1/2 BSP x 11 inches
Discharge nipple—1-1/2 NPT x 8-7/8 inch, requires #37 discharge nozzle
37 Discharge nozzle—1-1/2 NH, used with #36, 1-1/2 NPT discharge nipple
46 O-ring—7-1/4 x 7-1/2 inches, included with engine replacement kit #187, refer to
Product Overview Operation Maintenance Service Parts
Page 28.
Page 28.
|
31 40
Troubleshooting Warranty