Hanging Your Fan - Honeywell EASTOVER 10214 Owner's Manual

4. Remove the four bracket screws from underneath
the lower mounting bracket and save for later use
(Fig. 4).
Bracket Screw
5. Place tab on the lower mounting bracket into slot in
the upper mounting bracket. Then slide the second
lower mounting bracket tab into the second slot
on the upper mounting bracket until all four screw
holes are in alignment (Fig. 5).
6. Reinstall the previously removed bracket screws
underneath the lower mounting bracket and into
the upper mounting bracket. Securely tighten the
screws (Fig. 6).
Bracket Screw Washer

HANGING YOUR FAN

Washer
Fig. 4
Bracket Screw
and Washer
Fig. 5
Fig. 6
Bracket Screw
and Washer
6
Screw Hole
Tab
Slot