Honeywell HT350 Series Owner's Manual

Owner's Manual
IMPORTANT SAFETY
INSTRUCTIONS
READ AND SAVE THESE SAFETY
INSTRUCTIONS BEFORE USING
THIS FAN
When using electrical appliances,
basic precautions should always be
followed to reduce the risk of fire,
electric shock, and injury to persons,
including the following:
FOR US MODELS ONLY – This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse as
per the user servicing instructions (follow
product marking for proper fuse rating) and
check the product. If the replacement fuse
blows, a short-circuit may be present and the
product should be discarded or returned to
an authorized service facility for examination
and/or repair.
1.
Use this fan only as described in this
manual. Other use not recommended as
it may cause fire, electric shock or injury
to persons.
2.
This product is intended for household
use ONLY and not for commercial, indus-
trial or outdoor use.
3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.
Honeywell is a trademark of Honeywell International Inc., used under license by Helen of Troy Limited.
Honeywell International Inc. makes no representation or warranties with respect to this product.
QUIETSET
®
OSCILLATING TABLE FAN
HT350 Series
HT450 Series
4.
This appliance has a polarized plug (one
blade is wider than the other). To reduce
the risk of shock, this plug is intended
to fit only one way in a polarized outlet.
If the plug does not fit fully in the
outlet, reverse the plug. If it still does
not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety
feature.
5. Close supervision is necessary when any
appliance is used by or near children.
6. Turn the fan OFF and unplug the fan from
the outlet when not in use, when moving
the fan from one location to another and
before cleaning.
7.
To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall
outlet. Never pull the plug by the cord.
8.
Do not operate the fan in the presence of
explosive and/or flammable fumes.
9.
Do not place the fan or any parts near
an open flame, cooking or other heating
appliance.
10. Do not operate the fan with a damaged
cord or plug or if the product malfunc-
tions, is dropped or damaged in any
manner (see warranty).
11. Avoid contact with moving fan parts.
12. The use of attachments not recom-
mended by the manufacturer may be
hazardous.
13. Place the fan on a dry level surface.
14. Do not hang or mount fan on a wall
or ceiling.