Table of Contents
Advertisement
21. Use the fan reverse switch, located on the side
of the light kit, to optimize your fan for seasonal
performance (Fig. 21).
Using a ceiling fan will allow you to raise your
thermostat in the summer and lower your
thermostat in the winter without sacrificing comfort.
Important: Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set
either completely left or right in order for the fan to
function correctly. If the reverse switch is set in the
middle position, the fan will not operate.
22. In warmer weather, push the reverse switch left,
which will result in downward airflow creating a
wind chill effect (Fig. 22).
Note: Energy savings are possible by turning on
the ceiling fan and setting the thermostat a few
degrees warmer. To maximize savings, turn ceiling
fan off when no one is in the room.
23. In cooler weather, push the reverse switch right
and the fan to low, which will result in upward
airflow that can help move stagnant, hot air off the
ceiling area. By mixing the air, the heat may not
have to run as often and may yield energy savings
(Fig. 23).
OPERATING INSTRUCTIONS
13
Fig. 21
Fig. 22
Fig. 23
Reverse
Switch
Advertisement
Table of Contents
