Getting Started; Up And Running Overview; Keypad Operation - 3M QUESTemp 44 User Manual

2

Getting Started

Up and Running overview

Getting Started
Up and Running overview
1. Place the QUESTempº 44/46 in the work area in a safe location
approximately 3.5 feet off the ground.
2. Turn the unit On. If the battery voltage displayed during the power-on
sequence is less than or equal to 6.4 volts, replace or recharge the
batteries.
3. Be aware that the sensors require 10 minutes to stabilize to a new
environment.
4. In the main menu, View will be selected (an indicator arrow denotes the
selected menu). Press the I/O Enter key to select.
5. Press the Run/Stop key to begin datalogging. Use the arrow keys to set
the display to the desired items.

Keypad Operation

The unit operates using a keypad with 4 keys. The I/O Enter key responds when
the key is released while all other keys respond when the key is pressed.
053-664, Rev.C
Getting Started
QUESTempº 44 & 46 models