Safety Instructions For Installation - Miele CS 1212-1 Operating And Installation Instructions

Safety instructions for installation

Risk of damage from incorrect connection.

Incorrect installation can cause damage to the ProLine element.
The ProLine element must only be installed by a qualified person.
Damage from falling objects.

Take care not to damage the ProLine element when fitting wall units or a cooker
hood above it.
Fit the wall units and the cooker hood before the ProLine element.
The veneer or laminate coatings of worktops (or adjacent kitchen

units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.
The ProLine element must not be installed over a fridge, fridge-

freezer, freezer, dishwasher, washing machine, washer-dryer or
tumble dryer.
This CombiSet must not be installed above an oven unless it has

a built-in cooling fan.
After installation, the mains connection cable of the ProLine appli-

ance must not come into contact with any moving kitchen compon-
ent (e.g. a drawer) or be subject to mechanical loads which could
damage it.
Observe carefully the safety clearances listed on the following

pages.
All dimensions are given in mm.
38