Installation - Miele CS 1212-1 Operating And Installation Instructions

Installation

Preparing the worktop
 Make the worktop cut-out as shown
in "Building-in dimensions" or as cal-
culated (see "Installing several Pro-
Line appliances"). Remember to
maintain the minimum safety dis-
tances (see "Safety distances").
Wooden worktops
 Seal any cut surfaces on the wood
worktops with a special varnish, silic-
one rubber, or resin to prevent the
wood from swelling as a result of
moisture. The sealant must be heat-
resistant.
Make sure that the sealant does not
come into contact with the top of the
worktop.
48
 Position the spring clamps  and the
spacer bars  at the top edge of the
cut-out in the positions shown in the
illustrations.
 Secure the spring clamps  and
spacer bars  with the 3.5 x 25 mm
wood screws supplied.