Miele CS 1212-1 Operating And Installation Instructions page 53

Disconnecting from the mains
Risk of electric shock.

There is a risk of electric shock if the
appliance is connected to the mains
supply during repair or service work.
After disconnection, ensure the ap-
pliance cannot be switched back on
by mistake.
To disconnect the appliance from the
mains power supply, do one of the fol-
lowing depending on installation:
Safety fuses
 Completely remove fuses.
Automatic circuit breakers
 Press the (red) test button until the
middle (black) button springs out.
Built-in circuit breakers
 Circuit breakers at least type B or C:
Switch the lever from 1 (on) to 0 (off).
Residual current device (RCD)
 Switch the main switch from 1 (on) to
0 (off) or press the test button.
Electrical connection
Replacing the power cable
Risk of electric shock from mains

voltage.
Incorrect connection to the power
supply may result in an electric
shock.
The power cable must only be re-
placed by a qualified electrician.
If the power cable needs to be ex-
changed, it must be replaced with a
special connection cable, type H 05 VV-
F (PVC-insulated), available from the
manufacturer or from the Miele Cus-
tomer Service Department.
The required connection data is
provided on the data plate.
53