Installation; Safety Instructions For Installation - Miele KM 6381 Operating And Installation Instructions

Safety instructions for installation


Damage risk from incorrect installation.
Incorrect installation can cause damage to the hob.
The hob must only be installed by a qualified person.

Risk of electric shock.
Incorrect connection to the mains supply may result in an electric shock.
The hob must be connected to the electrical supply by a qualified person only.

Damage from falling objects.
Take care not to damage the hob when fitting wall units or a cooker hood above
it.
Fit the wall units and the cooker hood before the hob.

The veneer or laminate coatings of worktops (or adjacent kitchen
units) must be treated with 100 °C heat-resistant adhesive which will
not dissolve or distort. Any backmoulds must be of heat-resistant
material.

The hob must not be installed over a fridge, fridge-freezer, freezer,
dishwasher, washing machine, washer-dryer or tumble dryer.

This hob must not be installed above ovens or cookers unless
these have a built-in cooling down fan.

After installation, ensure that nothing can come into contact with
the connection cable and that it is without hindrance.

The electrical cable may not come into contact with any moving
kitchen component (e.g. a drawer) or be subject to mechanical ob-
struction which could damage it.

Observe carefully the safety clearances listed on the following
pages.
All dimensions are given in mm.

Installation

45