Reset Bgp Vpnv4 - H3C S9500 Series Command Manual

Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Default Level
1: Monitor level
Parameters
vpn-instance-name: Name of the VPN instance.
ip-address: IP address of the BGP peer.
mask: Network mask, in the format of X.X.X.X.
mask-length: Length of the network mask.
as-path-acl-number: Number of the AS_PATH list.
as-path-regexp: AS_PATH regular expression.
Description
Use the reset bgp vpn-instance flap-info command to clear the route flap history
information about BGP peers of a VPN instance.
Examples
# Clear route flap history information about BGP peer 2.2.2.2 of VPN instance vpn1.
<Sysname> reset bgp vpn-instance vpn1 2.2.2.2 flap-info

1.1.50 reset bgp vpnv4

Syntax
reset bgp vpnv4 { as-number | ip-address | group group-name | all | internal |
external }
View
User view
Default Level
1: Monitor level
Parameters
as-number: Resets VPNv4 connections with the peers in an AS identified by this
number.
ip-address: Resets the VPNv4 connection with a BGP peer identified by this IP
address.
group-name: Resets the VPNv4 connections with a BGP peer group identified by this
name.
all: Resets all BGP VPNv4 connections.
Chapter 1 MPLS L3VPN Configuration Commands
1-57