H3C S9500 Series Command Manual page 103

Command Manual – MPLS TE
H3C S9500 Series Routing Switches
View
Any view
Default Level
1: Monitor level
Parameters
level-1: Displays the TE information of IS-IS Level-1 devices.
level-1-2: Displays the TE information of IS-IS Level-1-2 devices.
level-2: Displays the TE information of IS-IS Level-2 devices.
verbose: Displays details.
process-id: IS-IS process ID.
vpn-instance vpn-instance-name: Specifies a VPN instance. For the default VPN
instance, you do not need to configure this keyword and argument combination.
Description
Use the display isis traffic-eng link command to display information about TE links
for IS-IS.
If no IS-IS level is specified, the TE link information of IS-IS Level-1-2 devices is
displayed.
Examples
# Display information about TE links for IS-IS.
<Sysname> display isis traffic-eng link
Level-2 Link Information
------------------------
0000.0000.0001.00-->0000.0000.0001.01
0000.0000.0002.00-->0000.0000.0001.01
0000.0000.0003.00-->0000.0000.0004.01
0000.0000.0004.00-->0000.0000.0004.01
Total Number of TE Links in Level-2 Area: 6, Num Active: 6
Chapter 1 MPLS TE Configuration Commands
TE information for ISIS(1)
--------------------------
Type: MULACC
Type: MULACC
Type: MULACC
Type: MULACC
1-12
LinkID: 10.1.1.1
LinkID: 10.1.1.1
LinkID: 30.1.1.2
LinkID: 30.1.1.2