H3C S9500 Series Command Manual page 238

Command Manual – MPLS L2VPN
H3C S9500 Series Routing Switches
Label Base
nexthop
pref
as-path
# Display L2VPN information with the RD being 100:1, the CE ID being 4, and the label
offset being 0 in the BGP routing table.
<Sysname> display bgp l2vpn route-distinguisher 100:1 ce-id 4 label-offset 0
BGP Local router ID : 2.2.2.9, local AS number : 100
Origin codes:i - IGP, e - EGP, ? - incomplete
nexthop:3.3.3.9,
label base:61442,label range:10,layer-2 mtu:1500,encap type:Ethernet
label
61442
61443
61444
61445
61446
61447
61448
61449
61450
61451
Table 1-6 Fields of display bgp l2vpn route-distinguisher ce-id label-offset
BGP Local router ID
local AS number
Origin codes
nexthop
pref
as-path
Field
Label base
IP address of the next hop
Preference
AS-PATH of the route
pref :100,
state
down
up
down
down
down
down
down
down
down
down
Field
BGP local router ID
Local AS number
Route origin codes, which can be:
i – IGP: Indicates that the network layer reachability
information is from within the AS
e – EGP: Indicates that the network layer reachability
information is learned through EGP
? – incomplete: Indicates that the network layer
reachability information is learned through other ways
IP address of the next hop
Preference
AS-PATH of the route
Chapter 1 MPLS L2VPN Configuration Commands
Description
as-path :
Description
1-11