Display Mpls Label - H3C S9500 Series Command Manual

Command Manual – MPLS Basics
H3C S9500 Series Routing Switches

1.1.8 display mpls label

Syntax
display mpls label { label-value1 [ to label-value2 ] | all }
View
Any view
Default Level
1: Monitor level
Parameters
label-value1: Specifies a label or, when used with the label-value2 argument, the start
label of a range of labels.
to label-value2: End label of a range of labels.
all: Specifies all labels.
Description
Use the display mpls label command to display the status of one or more specified or
all labels.
Examples
# Display the status of a specified label.
<Sysname> display mpls label 1280
Label alloc state: '.' means not used, '$' means used
-------------Dynamic Label--------------------------------
1280:.
# Display the status of all labels.
<Sysname> display mpls label all
---------------------------------------------------------------------
Label alloc state: '.' means not used, '$' means used
------------------------Static Label---------------------------------
16:.... ........ ........ ........
976:........ ........ ........ ........
------------------------Dynamic Label--------------------------------
1024: $ $$...... ........ ........
1088:.. ........ ........ ........
Chapter 1 MPLS Basics Configuration Commands
........ ........ ........ ........
........ ........
........ ........ ........ ........
........ ........ ........ ........
1-28