H3C S9500 Series Command Manual page 278

Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
# Display detailed information about BGP VPNv4 peer 1.1.1.1.
<Sysname> display bgp vpnv4 all peer 1.1.1.1 verbose
Received: Total 52 messages, Update messages 2
Sent: Total 65 messages, Update messages 5
Maximum allowed prefix number: 150000
Threshold: 75%
Minimum time between advertisement runs is 15 seconds
Optional capabilities:
Route refresh capability has been enabled
Connect-interface has been configured
Peer Preferred Value: 0
Routing policy configured:
No routing policy is configured
Table 1-8 Description on the fields of display bgp vpnv4 all peer verbose
Peer
Local
Type
BGP version
remote router ID
BGP current state
Peer: 1.1.1.1 Local: 2.2.2.2
Type: IBGP link
BGP version 4, remote router ID 1.1.1.1
BGP current state: Established, Up for 00h46m01s
BGP current event: RecvKeepalive
BGP last state: OpenConfirm
Port: Local - 1039
Configured: Active Hold Time: 180 sec
Received : Active Hold Time: 180 sec
Negotiated: Active Hold Time: 180 sec
Peer optional capabilities:
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast: advertised and received
Address family VPNv4: advertised and received
Field
Chapter 1 MPLS L3VPN Configuration Commands
Remote - 179
Description
IP address of the peer
IP address of the local device
BGP type
Version of BGP that the peer runs
Router ID of the remote device
Current status of the BGP session
1-15
Keepalive Time:60 sec
Keepalive Time:60 sec