Turning On The Unit; Turning Off The Unit - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH Construction and Functionality

5.3.3 Turning on the unit

Connect the unit to the power supply.
The user interface of the operating system displays after the boot-up routine. Remember that the display
resolution is set in the Image. In case the unit is equipped with a CODESYS HMI, it will start automatically
and display its status on the welcom screen.

5.3.4 Turning off the unit

With the Vico 04 device series, the power supply is taken directly from the device to switch it off, a
"shutdown" is not necessary.
Kuhnke Vico (E 854 DE) 29
28-03-2019