Usb Port, "Usb; Indicators And Controls, Vico; Ethernet "Lan; Accessories And Tools - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH

4.5.5 USB Port, "USB"

Pin wiring
NOTE
USB port overload by excessive power consumption
Machine failure and/or data loss
 Only attach USB peripherals whose total power needs do not exceed 0.5 A or supply
external power to the USB peripherals by adding an active hub to the line, for example.
USB sticks
USB stick users should consider the following points:

The USB port is mechanically designed to support up to 1,000 plug/unplug operations..

Pulling off a USB stick during operation is allowed only when no more file operations are being
performed. Failure to comply may render the USB stick useless! If a program still has a file open
when the USB stick is pulled, you will find it impossible to close the directory that the file belongs to.
In this situation, the system will not respond to any file or directory operation requests because it
would be expected to read from a device that is no longer available. Therefore, before pulling off the
USB stick, you should always ensure that no program still has an open file loaded from the stick.

4.6 Indicators and Controls, Vico

4.6.1 Ethernet "LAN"

LAN

4.7 Accessories and Tools

Info will be provided later
Kuhnke Vico (E 854 DE)
28-03-2019
X4 / X5 USB
Connector Pin
USB
LED Description for the LAN Ethernet port
LED 1 (green) LED 2 (yellow)
ON OFF
BLINK ON
BLINK OFF
Construction and Functionality
Function
B1 VCC
B2 D-
B3 D+
B4 GND
Explanation
No Ethernet connection
LAN connection @ 100 Mbit/s
LAN connection @ 10 Mbit/s
22