Putting Into Service; General Start-Up Information; Start-Up Prerequisites - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH

5.3 Putting into Service

5.3.1 General start-up information

Have the following tools at hand for starting the unit for the first time:

A USB keyboard

A USB mouse
Touch screen operation
Control objects on the touch screen are operated by applying a slight but noticeable pressure on them with
your finger or the touch stylus.
NOTE
Damage to the touch screen by pointed or sharp objects
Destruction of front
Do not use pointed or sharp objects to operate the touch screen.
 Avoid sudden or impact-like touch screen contact by hard objects. This may significantly
reduce touch screen life or provoke its complete failure. Touch the screen of Kuhnke
Touch with your finger or the stylus only.
Information
Always touch a single on-screen control object at a time. You may otherwise start unintended
actions.

5.3.2 Start-up prerequisites


Functional earth is connected.

All cables are attached properly.

Power is supplied to the unit.
Kuhnke Vico (E 854 DE)
28-03-2019
Construction and Functionality
28