Configuration; Ip Address - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH

5.4 Configuration

The Vico X04 is configured via the integrated user interface "system settings". The user interface can be
accessed directly on the device or remotely via a web browser.

5.4.1 IP address

Vico X04 is delivered with a permanent IP address and subnet mask setting.
IP address LAN (X3):
Subnet mask: 255.255.0.0
To connect to the unit for the first time, mind that your PC's IP address must be in the same range as that of
the unit.
This many involve changing your PC's IP address.
NOTE
Duplicate IP addresses
Assigning the same IP address to two different devices may cause serious network problems.
 Check your network for duplicate IP addresses.
 To put the unit into operation, we recommend using a direct network connection between
the unit and your programming PC and assign set IP addresses to both. You may have to
use a cross-over network cable.
Kuhnke Vico (E 854 DE)
28-03-2019
192.168.0.204
Construction and Functionality
30