Setting For Codsys Web Visu; Systems Settings; Activation Of Systems Settings; System Setting During Startup - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH
One item on the menu bar even takes you to the "System Settings" of Vico WEB.
 9 Systems Settings

8.1.2 Setting for CODSYS WEB Visu

The following settings should be made when using the Vico WEB terminal to display CODESYS WEB
visualizations.

On startup -> Open Homepage

Homepage e.g. for a Kendrion Starterkt:
http://192.168.0.113:8080/webvisu.htm

Tool Bar -> Enable Tool Bar: Activated

9 Systems Settings

9.1 Activation of Systems Settings

The configuration pages of the Vico Panel can be access in different ways.

9.1.1 System setting during startup

Use the so-called "Tap-Tap" procedure. This procedure consists in tapping the surface of the touchscreen
during the device power-up phase. Tapping frequency must be high. You have to start tapping the
touchscreen as soon as power has been applied to the device. When the sequence has been recognized,
the system shows the message: "TAP-TAP DETECTED". At this point release touch to boot in User Mode
without running the application.
Kuhnke Vico (E 854 DE)
28-03-2019
Construction and Functionality
38