Applicability And Intended Use - Kendrion Kuhnke Vico 404 User Manual

Kendrion Kuhnke Automation GmbH

3.1.1 Applicability and Intended Use

Kuhnke's panel is designed for on-site use in industrial environments immediately at the machine. It installs
in switching cabinets, switching or control panels.
This series of devices provides devices and equipment manufacturing with a visualisation unit for different
applications:
Place of installation
If installed in an enclosed space, the unit's front is protected against dust and water (IP 66). Ingress
protection at the back is IP 20 where it should be protected against humidity and dirt separately.
Waste heat develops in the rear part of the unit. Verify that the place of installation is ventilated properly.
NOTE
Damage to the unit
Choosing the wrong place of installation may cause damage to the unit.
 Check section Technical Data for the admissible ambient conditions and the unit's
mounting position.
Design constraints for high-risk use cases
The embedded Linux OS is not fault tolerant. It is neither designed nor intended for use in embedded
systems which have been shown to potentially cause fatal or serious personal injury or material or
environmental damage if the product fails or produces a fault ("High Risk Use ").
High-risk use applications are strictly prohibited.
DANGER
Danger caused by malfunctions
Fatality, serious personal injury or serious material or environmental damage
 High-risk use applications are strictly prohibited.
Kuhnke Vico (E 854 DE)
28-03-2019
Product Description
14