Source Audio Spectrum Intelligent Filter User Manual page 9

Power and Control Connections
DC 9V (Power)
Connect to the included 9 Volt DC power supply. The power supply must be regulated at 9 Volts
(direct current), able to source at least 165 mA (milliamps) of current, and the plug should have a tip-
negative, sleeve-positive polarity (the center tip is ground and the sleeve is power).
USB
Connect your computer (Mac or Windows) to the Spectrum's USB port (denoted by the
using a standard mini USB cable. The USB port handles communication between the pedal and the
Neuro Desktop Editor or a digital audio workstation (DAW). The Spectrum will also respond to MIDI
messages from an external MIDI Controller with USB host support. The Spectrum is a class compliant
USB device, meaning that Mac and Windows computers will recognize it automatically. For more
information about the Spectrum's USB capabilities, refer to the USB section of the User's Guide.
CONTROL INPUT Port
The 3.5 mm CONTROL INPUT Port connects to external control devices such as the Source Audio
External Tap Switch, Dual Expression Pedal, Neuro Hub, and Hot Hand 3 Motion Controller. For more
information, refer to the External Control and Neuro Hub sections of the User Guide.
SA248 Spectrum Intelligent Filter User Guide
icon)
9