Source Audio Spectrum Intelligent Filter User Manual page 21

Hardware Options
Clicking the gear icon in the Spectrum's Connections window opens the Hardware Options menu (see
the graphic below). Use the Hardware Options window to choose your pedal's global hardware
settings.
The Spectrum's Hardware Options include the following:
Preset/WYSIWYG: There are three different Preset Modes available in the Spectrum: Preset
•
(default), Control, and WYSIWIY ("What You See Is What You Get"). Use this dropdown menu
to select the Preset Mode. For more info on the functionality of each mode, go to the Three
Different Preset Modes section.
Hardware: Selects between two Hardware Bypass Modes: True Bypass or Active Analog
•
(Buffered) Bypass.
MIDI Channel: Selects the pedal's MIDI channel (1 through 16).
•
Control Input Option: Selects the function of the external device connected to the CONTROL
•
INPUT port. Options include:
Neuro Hub/Expression Pedal: Enables compatibility with the Neuro Hub (which
o
provides full MIDI functionality) or an external Expression Pedal (see details in the
External Control section).
Tap Tempo: Connect the Source Audio Tap Tempo Switch to the Spectrum and sync
o
its LFO rates with external tap tempo control.
External Loop Safe Mode: Check this box when using the Pre-Processing External Loop
•
routing option. It will prevent your effect from feeding back when engaged.
Power Up State: Selects whether the Spectrum is Engaged or Bypassed during the initial
•
power-up process.
SA248 Spectrum Intelligent Filter User Guide 21