Source Audio Spectrum Intelligent Filter User Manual page 52

Several CCs can potentially be mapped to the same parameter, although this is not very useful.
MIDI Clock
The Spectrum Intelligent Filter's LFO will sync to MIDI clock messages (also known as MIDI timing
clock or MIDI beat clock). MIDI clock is tempo-dependent and is used to ensure that multiple MIDI-
enabled devices stay in synchronization. A common use of MIDI clock with the Spectrum is when
recording along to a click track in a DAW (Digital Audio Workstation) running on a computer. MIDI
clock can be sent to the Spectrum directly over USB-MIDI or the Neuro Hub.
MIDI Clock can be enabled within the Spectrum on a per-preset basis. To enable MIDI Clock go the
LFO 1 & 2 block in the Neuro Desktop Sound Editor interface and select the MIDI Clock button. The
Spectrum begins its MIDI Clock sync as soon as the first MIDI Clock message is received. If the tempo
changes, the rate of MIDI Clock messages will change as well, and the Spectrum will adjust to
resynchronize itself accordingly.
Use the Beat Division dropdown menu in the LFO 1 & 2 block in the Neuro Desktop Sound Editor to
select the rhythmic subdivision of the incoming MIDI Clock. The Beat Division options are Whole, Half,
Quarter, Eighth, Triplet, and Sixteenth notes.
The Spectrum does not sync to MIDI timecode containing SMPTE timestamps.
Updating Spectrum Intelligent Filter Firmware
Firmware updates are achieved using the Neuro Desktop Editor. Download the latest version of
Neuro Desktop Editor from the Source Audio Downloads page. Open the updated Neuro Desktop and
connect the Spectrum to a computer using a mini USB cable. If the Spectrum is in need of an update
the Firmware Updates icon (the arrow icon) in the Connections field will be framed in yellow. Simply
click on the Firmware Updates icon you will be prompted through the process.
SA248 Spectrum Intelligent Filter User Guide 52