Spectrum Intelligent Filter Specifications; Troubleshooting - Source Audio Spectrum Intelligent Filter User Manual

Spectrum Intelligent Filter Specifications

Dimensions
Length: 11.63 cm (4.58 inches)
•
Width: 7.00 cm (2.75 inches)
•
Height (not including knobs and footswitch): 3.71 cm (1.46 inches)
•
Height (including knobs and footswitch): 5.61 cm (2.21 inches)
•
Weight
280 grams (0.625 pounds)
•
Power
9V DC, minimum 165 mA (maximum 195 mA when connected to a power reliant external
•
controller)
Negative tip (positive sleeve) barrel power jack, 2.1 mm inner diameter, 5.5 mm outer diameter
•
Audio Performance
Maximum Input Level: +6 dBV = 8.2 dBu = 2 V RMS = 5.6 V p-p
•
Input Impedance: 1 MegaOhm (1 MΩ)
•
Output Impedance: 600 Ohm (600 Ω)
•
108 dB DNR Audio Path
•
24-bit Audio Conversion
•
56-bit Digital Data Path
•
Universal Bypass
•

Troubleshooting

General
Restore factory settings: In order to revert the Spectrum to its factory settings, clearing all user data,
presets, expression mappings and custom effect types, perform a factory reset using one of the
methods described below.
Factory Reset using the Hardware
Disconnect power. While holding down the footswitch, reconnect power. The main LED and control
LED will be lit for a few seconds. When the reset is complete both LEDs will turn off and you can
release the footswitch.
Factory Reset using the Neuro Mobile App
Using the Neuro Mobile App, go to Hardware Settings and choose the Factory Reset option.
SA248
TM
(relay-based true bypass and analog buffered bypass)
Spectrum Intelligent Filter User Guide 53