Protocol Parameter Settings - HP ProLiant 300 Series Administration Manual

8. Click Finish.
Setting AppleTalk Protocol Properties
To set AppleTalk Protocol properties:
1. From the WebUI, click the Shares tab.
2. Click Sharing Protocols.
3. Click the AppleTalk radio button, and then choose Properties.
4. Insert login message, if desired.
5. Under Security, "Enable client authentication with," select Apple Clear Text or Microsoft.
To set up AppleTalk shares, from the WebUI:
1. Click Shares.
2. Click Shares again.
3. Click New.
4. Enter the share name and share path.
5. Select Apple MacIntosh. Clear other file types if necessary.
6. Click AppleTalk Sharing.
7. Enter a user limit.
8. Enter password information.
9. Indicate whether the share has read only permission or read write permission.
10. After all AppleTalk Sharing information is entered, click OK.

Protocol parameter settings

As previously mentioned, the storage server supports the following protocols:
• DFS
• NFS
• FTP
• HTTP
• Microsoft SMB
This section discusses the parameter settings for each protocol type.
NOTE:
See the Protocol section of the Cluster Administration chapter for information about protocol selection
and management in a cluster.
106
Folder, Printer, and Share Management