Local Area Connection Properties Page, Install Option - HP ProLiant 300 Series Administration Manual
Hide thumbs
Also See for ProLiant 300 Series:
- Introduction manual (22 pages) ,
- Troubleshooting manual (194 pages)
Table of Contents
Advertisement
AFP (Appletalk) sharing
AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have
been installed on the storage server.
NOTE:
AppleTalk shares should not be created on clustered resources as data loss can occur due to local
memory use.
Installing the AppleTalk Protocol
To install the AppleTalk Protocol:
1.
From the desktop of the storage server, select Start > Settings > Network Connections.
Right-click Local Area Connection, and then click Properties.
2.
Click Install.
Figure 56 Local Area Connection Properties page, Install option
3.
Select Protocol, and then click Add.
4.
Select AppleTalk Protocol, and then click OK.
Installing File Services for Macintosh
To install File Services for Macintosh:
1.
From the WebUI, click the Maintenance tab.
2.
Click Remote Desktop.
3.
Open Add/Remove Programs from the Control Panel.
4.
Click Add/Remove Windows Components.
5.
Double-click Other Network File and Print Services.
6.
Select File Services for Macintosh, and then click OK.
7.
Click Next.
HP ProLiant Storage Server administration guide
105
Advertisement
Table of Contents
