Folder, Printer, and Share Management
6. Select File Services for Macintosh then click OK.
7. Click Next.
8. Click Finish.
Setting AppleTalk Protocol Properties
To set AppleTalk Protocol properties:
1. From the WebUI, click the Shares tab.
2. Click Sharing Protocols.
3. Click the AppleTalk radio button, then choose Properties.
4. Insert login message, if desired.
5. Under Security, "Enable client authentication with," choose Apple Clear Text or
To set up AppleTalk shares, from the WebUI:
1. Click Shares.
2. Click Shares again.
3. Click New.
4. Type in the share name and share path.
5. Check Apple MacIntosh. Uncheck other file types if necessary.
6. Click AppleTalk Sharing.
7. Enter a user limit.
8. Enter password information.
9. Indicate whether the share has read only permission or read write permission.
10. After all AppleTalk Sharing information is entered, click OK.
Protocol parameter settings
As previously mentioned, the NAS server supports the following protocols:
This section discusses the parameter settings for each protocol type.
92
Microsoft.
DFS
NFS
FTP
HTTP
Microsoft SMB
NAS 1500s and 500s Administration Guide