Managing Shares For A Volume Or Folder; Create New Share Page, General Tab - HP ProLiant 300 Series Administration Manual

Figure 44 Create New Share page, General tab
3. Enter the information for the share, including the name of the share, the allowed protocols, and
corresponding permissions.
NOTE:
The Share path is the path of the previously selected volume or folder. This field is automatically
completed by the system.
4. Select the appropriate tab to enter protocol specific information.
See the "Managing
5. After entering all share information, click OK.
NOTE:
The default permission settings for a new share are read-only.

Managing shares for a volume or folder

Within the WebUI, there are two access points to the same screens used to manage file shares:
• While working with a folder in the Folders pages, the administrator can create, delete, and
modify shares for that folder.
• While working with file shares in the Shares pages, the administrator can create, delete, and
modify shares (and if necessary, create new folders).
shares" section for detailed information about these entries.
HP ProLiant Storage Server administration guide
91