Additional Resources; Appletalk And File Services For Macintosh; Installing The Appletalk Protocol; Installing File Services For Macintosh - HP PROLIANT ML110 G5 User Manual

Millennium clients, these non–Windows clients do not receive driver updates from the print server
after a driver is initially downloaded. The same connection methods are available: drag and drop,
the Add Printer Wizard, referencing a UNC path, or double-clicking the shared printer icon.

Additional resources

For more information about using and configuring File and Print Services for NetWare, see the online
help.

AppleTalk and file services for Macintosh

The AppleTalk network integration allows the storage server to share files and printers between your
server and any Apple Macintosh clients that are connected to your network. After installing Microsoft
Windows Services for Macintosh, the administrator can use the AppleTalk protocol to configure the
storage server to act as an AppleTalk server. The AppleTalk protocol is the communications protocol
used by clients running a Macintosh operating system. The Macintosh computers need only the
Macintosh OS software to function as clients; no additional software is required.
AppleTalk network integration simplifies administration by maintaining just one set of user accounts
instead of separate user accounts, for example, one on the Macintosh server and another on the
computer running Windows server software.

Installing the AppleTalk protocol

1. From the desktop of the storage server, select Start > Settings > Network Connections. Right-click
Local Area Connection, and then click Properties.
2. Click Install.
3. Select Protocol, and then click Add.
4. Select AppleTalk Protocol, and then click OK.

Installing File Services for Macintosh

To install File Services for Macintosh, perform the following steps:
1. Access the desktop on the storage server.
2. Open Add or Remove Programs from the Control Panel.
3. Click Add or Remove Windows Components.
4. Double-click Other Network File and Print Services.
5. Select File Services for Macintosh, and then click OK.
6. Click Next.
7. Click Finish.

Completing setup of AppleTalk protocol and shares

See the online help to complete the following setup and configurations tasks:
• To set up AppleTalk protocol properties
AppleTalk shares can be set up only after AppleTalk Protocol and File Services for Macintosh have
been installed on the storage server.
HP ProLiant Storage Server 119