Checking The Status Of The Team; Nic Team Tcp/Ip Properties Dialog Box - HP ProLiant 300 Series Administration Manual
Hide thumbs
Also See for ProLiant 300 Series:
- Introduction manual (22 pages) ,
- Troubleshooting manual (194 pages)
Table of Contents
Advertisement
Figure 114 NIC Team TCP/IP Properties dialog box
NOTE:
If a NIC is teamed, do not modify the TCP/IP settings for the individual NIC ports.
4.
Select Use the following IP address, and then enter the IP address and subnet mask. If
desired, enter the default gateway.
5.
Click OK. The Ethernet Team should be working.
Checking the status of the team
To check the status of the Ethernet Team, open the HP Network Teaming utility. The Configuration
Properties window is displayed, showing the teamed NICs.
214
NIC Teaming
Advertisement
Table of Contents
