Publishing An Existing Share In Dfs; Removing A Published Share From Dfs; Dfs Share Example, Mapped Drive - HP ProLiant 300 Series Administration Manual
Hide thumbs
Also See for ProLiant 300 Series:
- Introduction manual (22 pages) ,
- Troubleshooting manual (194 pages)
Table of Contents
Advertisement
Figure 62 DFS share example, mapped drive
In this case, Documentation exists on G:\documentation, Technical Specs exists on G:\technical
specs and Project Info exists on C:\project info on the local machine but they are all accessible via
\\DOCBOX\engineering.
Publishing an existing share in DFS
To enable an existing shares for DFS:
1.
From the WebUI, click the Shares tab.
2.
Select the target share from the table, and then click Publish in DFS.
3.
Enter the name of the DFS root to publish the share to.
4.
Click OK.
The share appears in the DFS underneath the DFS root.
Removing a published share from DFS
After a share is published in DFS, it can be removed from the virtual namespace via the Shares
Property page. To remove a share from DFS perform the following steps:
1.
From the WebUI, click the Shares tab.
2.
Select the target share from the table and select properties.
HP ProLiant Storage Server administration guide
113
Advertisement
Table of Contents
