Informative Messages - Swegon GOLD PX Series Operation And Maintenance Instructions

18 INFORMATIVE MESSAGES

Informative messages are displayed in the hand-held micro
terminal. Informative messages are displayed only when
the user is viewing the Main menu.
Informative messages provide particulars about neces-
sary settings that have not been entered or unfavourable
operating scenarios, for instance.
Message no.
1
2
3
4
5
6
7
8
58 www.swegon.com
Message text
FILTER CALIBRATION NOT EXECUTED
The pressure across the filters was not calibrated after the first start. Recurrent at 24-hour intervals. The mes-
sage will not be received after the pressure across the filters has been calibrated.
H EXCH CALIBRATION NOT EXECUTED
The pressure across the heat exchanger was not calibrated after the function was activated for the first time.
Recurrent at 24-hour intervals. The message will not be received after the pressure across the heat exchanger
has been calibrated.
INCORRECT DIP SWITCH SETTINGS
DIL switches on the control circuit card are set in a forbidden combination.
SPARE
MODEM/E-MAIL ERROR
Error in communication to the modem or error when e-mail is being delivered. The message will be displayed
after ten attempts.
PREFILTER CAL NOT EXECUTED
The pressure across the prefilters was not calibrated after the first start. Recurrent at 24-hour intervals. The
message will not be received after the pressure across the prefilters has been calibrated.
ReCO CALIBRAT NOT EXECUTED
2
ReCO was not calibrated after the function was activated for the first time. Recurrent at 24-hour intervals. The
message will not be received after the RecCO has been calibrated.
INCORRECT ReCO SETTING
2
Pressure control, slave control or wrong type of air handling unit has been selected. Recurrent at 5-minute
intervals
GB.GOLDSK509.091101
We reserve the right to alter specifications without notice.