Modify The Value Of Monitoring Point - FATEK CBEH Manual

7.3 Modify the Value of Monitoring Point

To control the monitoring point content, first move the mouse cursor to the Value
field of the point you want to control and click the left button. The following pop-up
window will appear:
Here different pop-up windows will appear according to the data type and display
formats; there are total of three types as shown below:
1
① When the monitoring point is a contact type such as X, Y, M, this window will
appear; it can only be set to 0 or 1.
② When the monitoring point is a positive or negative integer or positive integer,
this window will appear.
③ When the monitoring point is hexadecimal, this window will appear.
If the user wants to modify the value content, input the data in the popped-up
window and then press the Enter button to complete the modification of the content
of that point.
65
2
3