Modifying And Deleting Monitoring Points - FATEK CBEH Manual

Decimal), positive integer (Unsigned Decimal) or Hexadecimal.
When the new point is added, the newly added data can be seen in the Status
Monitoring field, as shown in the figure below:
You can also notice that the communication signal on the top-right of the webpage
will start to flicker, this means that the communication status with the PLC is normal:

7.2 Modifying and Deleting Monitoring Points

To modify a monitoring point, click the button behind that point in the Status
Monitoring field, the icon is to modify; when pressed, the icon will change to and
the highlighted parts will turn red, then you can edit the Add/Edit-Status field on top
and then press the Apply button to complete the modification. To delete a point,
please directly press the button to delete that corresponding data entry.
64