Chapter 6 Internet Clock Synchronization; Enable The Internet Clock Synchronization Function - FATEK CBEH Manual

Chapter 6 Internet Clock Synchronization

The CBEH expansion board provides the internet clock synchronization function; its
main goal is to eliminate the problem of manually correcting the time on a regular
basis. After the internet clock synchronization function is enabled, the system will
get the standard time from the internet time server (NTP server) set by the user
every 10 minutes. If the user needs to use the clock synchronization function, it can
be set through the Ether_Config software or open the browser and enter the system
page provided by CBEH to perform the settings.

6.1 Enable the Internet Clock Synchronization Function

The steps to enable the CBEH internet clock synchronization function through the
Ether_Config software are as follows:
1
2
4
3
① Move the mouse cursor to the line that includes the CBEH expansion board,
double-click it or click the Properties... button to enter configuration setting.
60