Chapter 7 Monitoring Plc's Internal Status Using The Cbeh System Webpage; Adding Monitoring Points - FATEK CBEH Manual

Chapter 7 Monitoring PLC's Internal Status Using The CBEH
System Webpage
The CBEH expansion board provides the function to monitor the status of the PLC
with web browser. To use this function, open a web browser and connect to the
CBEH expansion board, select system page and login, then click the PLC Status page
to see the following screen:
The status monitoring page as the following features:
 The data display format can be in three forms: positive or negative integers
(Signed Decimal), positive integer (Unsigned Decimal) and Hexadecimal.

It can monitor up to 5 registers/contacts at one time.
 When communication is normal there is a communication signal icon: red
means sending, green means receiving; when communication is normal, the red
light and green light will flicker simultaneously, if no response message is
received, only the red light will flicker.

7.1 Adding Monitoring Points

To add new monitoring points, in the Add/Edit-Status field, enter the point
information and then press the Add button:

Reference No.: The reference number of the monitored point.

Format: Data format; can be set to positive or negative integers (Signed
63