Service Ports; Password - FATEK CBEH Manual

3.1.6 Service Ports

When the CBEH expansion board is working under TCP or UDP server mode, the
external service ports must be set so that the external client workstations can send
service requests according to the set service port numbers.
CBEH's default FATEK communication protocol service port is 500, Modbus'
communication protocol service port is 502, Http communication protocol service
port is 80. A maximum of 2 service port numbers can be provided to each service at
the same time; one is a fixed default port (Secondary Port) and the other is a
modifiable port (Major Port). If the user wants to modify the latter to a non-default
port number, the Service Ports setting page can be used to make the modification.
While modifying, just enter the port number you want to modify to in the Major Port
field.

3.1.7 Password

Password protection: The factory's default password is 1234; if the user wants to
change the password, they can click the Password setting page and the following
screen will appear:
Just enter the password you want to use in the New Password and Confirm Password
fields, and then press the Change button to complete the setting. To cancel the
password, just press the Remote button.
22