Miele H 7260 BP Operating And Installation Instructions page 82

Problem solving guide
Problem
Press OK for 6 seconds
appears in the display
when the oven is
switched on.
Power cut appears in the
display.
12:00 appears in the
display.
Max. op. hours reached
appears in the display.
 appears in
Fault F32
the display.

Fault F33 appears in
the display.
and a fault code
Fault
not listed here appears
in the display.
A noise can be heard
after a cooking process.
The oven has switched
itself off.
82
Possible cause and remedy
The system lock  has been switched on.
 You can deactivate the system lock for a
programme by touching the OK sensor for at least
6 seconds.
 If you want to permanently deactivate the system
lock, select the
There has been a brief power cut. This has caused
the current cooking programme to stop.
 Switch the oven off and then back on again.
 Restart the cooking programme.
The power supply was interrupted for longer than 150
hours.
 Reset the time and date.
The oven has been operating for an unusually long
time. This has triggered the safety switch-off function.
 Confirm with OK.
The oven is now ready to use.
The door lock for pyrolytic cleaning has not locked.
 Switch the oven off and then back on again. Start
the pyrolytic cleaning programme again.
 If the message appears again, contact Miele.
The door lock for pyrolytic cleaning does not open.
 Switch the oven off and then back on again.
 If the door lock still does not unlock itself, contact
Miele.
A fault has occurred that you cannot resolve.
 Call Miele.
The cooling fan remains switched on after a cooking
programme (see "Settings – Cooling fan run-on").
The oven will switch itself off automatically to save
energy if no other action is taken within a certain time
frame after switching it on or after the end of a
cooking programme.
 Switch the oven back on.
Safety | System lock  | Off setting.