Epson DS-870 User Manual page 38

User's Guide
3. Load the laminated cards into the input tray facing down with the top edge facing into the ADF.
Slide the laminated cards into the ADF until they meet resistance.
4. Slide the edge guides to fit the edge of the laminated cards.
Note:
To scan laminated cards, set the appropriate setting in the Epson Scan 2 window. When you are using Document
Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan Settings screen.
❏ To increase the accuracy of auto size detection, select the Main Settings tab > Document Size > Settings > Scan
laminated card. See the Epson Scan 2 help for details.
❏ Select the Main Settings tab > Detect Double Feed > Off. See the Epson Scan 2 help for details.
If Detect Double Feed is enabled in the Epson Scan 2 window and a double feed error occurs, remove the card from
the ADF, reload it, press the
the control panel to set it to On. This disables Detect Double Feed for the next scan, and you can scan again. The
DFDS Function only disables Detect Double Feed for one sheet.
Specifications of Originals and Placing Originals
d
button, and then select DFDS Function (Double Feed Detection Skip function) on
38