Epson DS-870 User Manual page 41

User's Guide
5. Slide the edge guides to fit the edge of the Carrier Sheet making sure there are no gaps between the Carrier
Sheet and the edge guides. Otherwise, the carrier sheet may be fed skewed.
Note:
❏ You may need to stop using a Carrier Sheet that is scratched or has been scanned more than 3,000 times.
❏ To scan both sizes and stitch them together, set the appropriate setting in the Epson Scan 2 window. When you are
using Document Capture Pro, you can open the window by pressing the Detailed Settings button on the Scan
Settings screen.
Select Double-Sided from Scanning Side and select Left & Right from Stitch Images in the Epson Scan 2 window.
See the Epson Scan 2 help for details.
❏ When scanning a Carrier Sheet by selecting Auto Detect as the Document Size setting, the image is automatically
scanned by applying Paper Skew in the Correct Document Skew setting.
❏ The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm long. Otherwise, the length of the scanned image may be longer than intended as the scanner
scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the Epson Scan 2
window.
❏ Only use the Carrier Sheet designed for your scanner. The Carrier Sheet is automatically recognized by the scanner
by detecting two small rectangular holes on the front edge. Keep the holes clean and not covered.
Related Information
"Carrier Sheet Codes" on page 19
&
"Required Settings for Special Originals in Epson Scan 2" on page 71
&
Specifications of Originals and Placing Originals
41