Lcd Brightness - Epson DS-870 User Manual

User's Guide
Paper Protection
Reduces damage to the originals by stopping scanning immediately when the following status is
detected.
❏ A feeding error for the originals occurs
❏ Originals are fed askew
Select the detection level to enable this feature. See the table below for details on each level.
Level
On-Lowest
On-Low
On-High
On-Highest
Important:
c
❏ This feature does not reduce damage to all jammed originals.
❏ Depending on the condition of the originals being fed, you cannot detect feeding errors.
Note:
Depending on the original, the condition of the originals being fed, and the level you set, this feature may not work correctly.
❏ Select Off to disable the feature when scanning plastic cards or thick paper.
❏ If misdetections occur frequently, lower the level of this feature.
❏ Some originals may be misdetected as feeding errors, such as irregular shaped originals or originals scanned askew.
❏ When scanning multiple originals, make sure that the edges of the originals are aligned. Originals may be misdetected as
feeding errors if the edges of the originals are not aligned, even if they are scanned correctly.
❏ To scan the originals without skewing, adjust the edge guides to fit the edge of the originals before scanning.
Detect Glass Dirt
Detects dirt on the glass surface inside the scanner. You can select the level of the detection.
Depending on the dirt, this feature may not work correctly.
Ultrasonic Double Feed Detection
Detects a double feed error when multiple originals are fed and stops scanning.
Depending on the original, such as envelopes, plastic cards, originals with labels or stickers, and so on,
this feature may not work correctly.

LCD Brightness

Adjust the brightness of the LCD screen.
Menu Options on the Control Panel
Examples of Protectable Paper
Plain paper
Plain paper/Thin paper
Thin paper(Horizontal), such as
vouchers
Thin paper(Vertical), such as
application forms
89
Detection Sensitivity for Feeding
Skew
Low
Middle
High