Table of Contents
Advertisement
User's Guide
6. Slide the edge guides to fit the edge of the originals making sure there are no gaps between the originals and
the edge guides. Otherwise, the originals may be fed skewed.
Note:
❏ When scanning originals with punch holes such as loose leaf paper, load the originals with the holes facing to the side
or facing down. There must not be any holes within a 30 mm (1.2 inches) strip at the center of the originals.
However, there can be holes within 30 mm (1.2 inches) from the leading edge of the originals. Make sure that the
edges of the punch holes do not have burrs or curls.
❏ When scanning thin paper with crinkles that are causing paper jams or double feeds, you may be able to improve the
situation by enabling Slow. To do this, select Settings > Scanner Settings > Slow on the control panel and set it to
On to slow down the feeding speed.
Specifications of Originals and Placing Originals
30
Hide quick links:
Advertisement
Table of Contents
