Bartscher 900004 Instruction Manual page 4


The supply cable must not be bent, crushed, tangled, it must be
always completely unwound. Do not place the device or other objects
on the supply cable.

Do not place the supply cable on carpets or other flammable
materials. Do not cover the supply cable and place it away from work
areas.

Periodically inspect the electric supply cable for damages. Do not
operate the device with damaged supply cable. When the cable is
damaged it should be replaced by the service company or qualified
electrician in order to avoid hazards.

Never touch the supply cable with wet or moist hands.

Never use the supply cable for carrying, lifting, or moving the device.

The supply cable must be disconnected from the socket only by
pulling the plug.

In any case do not open the device housing. In case of electrical or
mechanical modifications the electric shock hazard will occur.

Remove the plug from its socket:
when the device is not used,
-
in case of anomalies during operation,
-
before cleaning.
-

The maintenance and repair works must be performed only by the
qualified professionals with use of original spare parts and equipment.
Never attempt to repair the device by yourself!

Do not use the accessories and spare parts not recommended by the
manufacturer. They may be dangerous for the user and other people or
may damage the device, harm anyone, and cause loss of warranty
rights.

In order to avoid hazards and assure optimum performance it is
forbidden to make any replacements or modifications in the device,
not expressly approved by the manufacturer.
- 29 -