Table of Contents
Advertisement
Fill the water tank up to MAX mark, observe the
filling indicator.
Caution: Pour water slowly to make sure that
MAX mark is not exceeded. The first complete
filling of water tank requires approx. 3.25 litres
of water.
CAUTION!
Never start the device without water in the tank in order to avoid the
heater damage.
When there is insufficient level or lack of water in
the tank the protection cuts off the heater power
supply. Disconnect the device from the socket
(pull the plug!) and wait for cooling down.
Fill the water tank.
In order to restart the device remove the
protective screw (A) with appropriate tool. (fig. 4)
To start the device press Reset button with
appropriate tool (fig. 5).
Open the container lid ad fill it with prepared drink
according to manufacturer's recommendations.
Caution: Never exceed MAX level in the
container.
After pouring the drink cover the container
with the lid.
Make sure that the plug is connected to
grounded socket.
In order to start the device press
ON/OFF switch.
The power indicator will come on.
The power indicator goes off when the
device is turned off with ON/OFF switch.
- 38 -
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Advertisement
Table of Contents
