Bartscher 900004 Instruction Manual page 26

Problem Possible reason
Too high temperature
Damaged seal of the
Water leaks
water tank
from the
water tank
Water level exceeds
MAX mark
The container is not
Drink leaks
installed correctly
at the
container
Damaged seal of
bottom
container bottom
Water level in the water tank
The
is below minimum
overheating
protection
No water in the water tank
was
triggered
When the anomalies cannot be removed:
disconnect the device from the socket (pull the plug!)
-
do not open the housing,
-
contact the vendor.
-
Solution
Set lower temperature
Contact the service company
Wait for the device to cool down
and drain water excess to obtain
its correct level
Empty the container, remove it and
reinstall according to section 6.2.7
Contact the service company
Fill the tank with water up to MAX level,
press Reset button (section 5.2)
and restart the device
Fill the tank with water up to MAX level,
press Reset button (section 5.2)
and restart the device
- 51 -