Arrow PA-28R-201 Pilot's Operating Handbook And Faa Approved Airplane Flight Manual page 268

SECTION
I)
SUPPLEMENT 7
b. Heading Hold
PIPER AIRCRAFT CORPORATION
PA-28R-201, ARROW
(I) Heading Selector Knob - SET BUG to desired heading. (
(2) HOG Mode Selector Button - PRESS. Note HOG
mode annunciator ON. Autopilot will automatically
turn the airplane to the selected heading.
c. Command Turns (Heading Hold mode ON)
(I) HEADING Selector Knob - MOVE BUG to the
desired heading. Autopilot will automatically turn the
aircraft to the new selected heading.
6. NA V Coupling
a. When equipped with HSI.
(I)
Course Bearing Pointer - SET to desired course.
NOTE
When equipped with N A V 1/ NA V 2 switching
and NAV 2 is selected. set OBS to the desired
course.
(2) HEADING Selector Knob - SET BUG to provide
desired intercept angle.
(3) NAV Mode Selector Button - PRESS.
(a) If the Course Deviation Bar is greater than 2 to 3
dots: the aircraft will continue in HOG mode (or
wings level if HOG not selected) with the NAV
annunciator flashing; when the computed capture
point is reached the HOG wi II disengage. the
NA V annunciator will illuminate steady and the
selected course will be automatically captured
and tracked.
(b) If the D-Barislessthan2t03dots: the HOG mode
will disengage upon selecting N A V mode; the
NA V annunciator will illuminate steady and the
capture/track sequence will automatically begin.
b. When equipped with DG
(I) OBS Knob - SELECT desired course.
(2) NAV Mode Selector Button - PRESS.
REPORT; VB-1J65
ISSUED: SEPTEMBER 15, 1988
9-60, 6 of 28
(
(