Table of Contents
Advertisement
OPERATION INSTRUCTIONS (continued)
Remote Control:
1. Remove the insulation material under the battery.
Battery type (included): CR2032. Be sure the battery
cover is securely attached.
2. Place the remote control in a reachable location (on top
of the horizontal pool frame). The back of the remote
control is magnetized.
Note: In an emergency situation, simply press the "emergency cut off" button to shut off the
system completely, the indicator light inside the remote control housing will light up and the
display panel will indicate "C".
•
Check and make sure all screws are securely tightened on a regular basis.
•
When not in use, fold the display panel down and cover the pool with a pool cover.
Long Term Storage and Winterization
You must disassemble and store the product indoors when the temperature drops below 0
32
O
F or when the appliance will not be used for a long period of time.
IMPORTANT: Close the support bracket before
disassembling and removing the swim-trainer unit from
the mounting bracket assembly (Only for Intex
Rectangular Frame Pools).
1. Turn off the transformer and unplug the power
cable from the electrical outlet.
2. Disconnect the swim-trainer unit power cable from
the transformer.
3. Remove the swim-trainer unit and the mounting
bracket assembly from the pool by reversing
the installation instructions.
4. Clean the swim-trainer unit with a garden hose, and air-dry thoroughly under the sun.
5. Store the unit and accessories in a dry place. The storage's temperature should be between
0
O
C / 32
O
F and 40
O
C (104
SAVE THESE INSTRUCTIONS
(303IO) MODEL SM24100 SWIMMING MACHINE ENGLISH 7.5" X 10.3" PANTONE 295U 08/30/2018
MAINTENANCE
O
F). The original packing can be used for storage.
English
Emergency Cut off Button
4
22
Page 15
303A
C /
O
10
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Hydro Flow Swim Trainer SM24100 and is the answer not in the manual?