Operating Instructions - Intex Hydro Flow Swim Trainer SM24100 Owner's Manual

OPERATION INSTRUCTIONS
Display Panel Function
Zone #1 Function Zone #2 Function
D
A B C E F
A: On/Off Button: Once the swim-trainer unit is connected to the
transformer and the transformer turned ON, use this button to active the system.
The LED panel will show the default speed setting once activated.
B/C: Speed Adjustment Buttons: Press to increase or decrease the speed setting.
NOTE: The default speed is 3; speed adjustment ranges from 1 to 8.
D: Speed Setting Display: Once activated the system displays the swim-trainer
unit speed automatically.
Zone #2 Function
H: Toggle button between Timer
Timer Mode: Allows the user to program the duration of the
swimming time (in minutes). Once the time is reached,
the machine will stop. Maximum setting is 90 minutes.
E: Timer Increase Button
F: Timer Decrease
G: Timer Review/Confi rm Button
I: Timer LED Display
Counter Mode: Tracks the duration (in minutes) or calorie
(in kcal) or distance (in kilometer or mile) of the swim.
E/F: Counter unit toggle button (minute / kcal
/ kilometer / mile)
Counter On/Pause Button. Press for 2 sec
G:
to reset the counter.
Counter LED Display
I:
SAVE THESE INSTRUCTIONS
(303IO) MODEL SM24100 SWIMMING MACHINE ENGLISH 7.5" X 10.3" PANTONE 295U 08/30/2018
Zone #1 Function
A: On/Off Button
B: Speed Increase Button
I
C: Speed Decrease Button
D: Speed Setting Display
G H
" "
and Counter
Antenna
" "
Mode.
E F
E F
English
303A
I
G
H
I
G
H
Page 14